Solar Panels Perth

A Practical Load-Shifting Plan for Perth Homes: Moving Appliances Into the 8.85c Midday Window

Short answer: on Synergy's 2026 Midday Saver plan, every unit moved from the 3pm to 9pm peak (55.3253c) to the 9am to 3pm window (8.852c) saves about 46.5c, and every unit moved from overnight (24.3431c) to midday saves about 15.5c. With solar on the roof, units used at midday may cost nothing at all. A household that moves 6 units a day out of the evening can save around $1,000 a year, using timers and habits rather than new equipment.

Know the savings per unit

Move a unit from To 9am to 3pm Saving per unit
3pm to 9pm (55.3253c) 8.8520c 46.47c
9pm to 9am (24.3431c) 8.8520c 15.49c
Any time on A1 (33.2621c) Own solar 33.26c

If you are on the Home Plan (A1), load shifting still helps when you have solar, because each unit you use at midday from your own panels avoids buying a unit at 33.2621c and gives up only a 2c DEBS export credit.

Typical appliance energy use

These are typical ranges for common appliances. Your own models may differ, so check the energy label or a plug-in meter.

The daily plan

Morning (before 9am)

Keep it light. Set the dishwasher, washing machine and dryer on delay so they start after 9am. Avoid running the kettle and toaster at the same time as other big loads if you want to stay within your solar output later.

Midday (9am to 3pm)

This is the cheap window. Aim to run:

Evening peak (3pm to 9pm)

Cook, light, and relax, but avoid discretionary loads. If you pre-cooled from 1pm, you may be able to raise the thermostat a couple of degrees.

Overnight (9pm to 9am)

Rate falls to 24.3431c. If the EV must charge overnight, consider Synergy's EV Add On overnight rate of 19.9172c from 11pm to 6am, if you are eligible.

Tools that make it automatic

A worked weekly example

A family on Midday Saver moves:

Weekly savings:

That is about $20.33 a week, or roughly $1,057 a year, with no new hardware.

What about the solar export?

Each unit used at midday instead of exported gives up a 2c DEBS credit. That is small compared with the 46c or 15c saved, so self-use nearly always wins.

When load shifting is not enough

If, after shifting, you still use 5 or more units between 3pm and 9pm, a battery is the next step. The midday surplus you no longer export can charge it. In 2026 a battery attracts both the federal STC discount and, for Synergy customers, up to $1,300 from the WA scheme.

Track your progress

After a month, compare your bill's peak, off-peak and super off-peak units with the month before. If the peak share has not dropped, check which timers have reset or which habits have slipped. A plug-in energy meter can also show which appliances are the biggest evening users.

Common mistakes

Details on a 9 kW solar system for Perth homes show how much midday energy a bigger array can supply. Local installers such as Fusion Sun Solar in Perth can review your tariff and timers, and these energy-saving notes for WA households suggest more habits worth trying.

Frequently asked questions

How much do I save by moving a unit out of the peak?

About 46.5c on Midday Saver in 2026.

Is load shifting worth it on A1?

Yes if you have solar, because self-used solar avoids buying at 33.2621c.

Which appliance is the best one to move?

Usually the pool pump or hot water, because they use the most energy.

Do I need a smart home system?

No. Built-in timers on most appliances are enough.

Conclusion

Load shifting is the cheapest energy upgrade there is. Set the timers once, move the big loads into the middle of the day, and let the 8.85c window do the work.